Overview
Our Kerself submersible borehole pump is designed for pumping water from deep wells or boreholes to supply farm, irrigation, industry or domestic requirements. It is supplied with a special manufactured 2 hp, single phase motor to suit the power required by the pump mounted above. The pump is supplied with its own control panel comprising of illuminated on/off switch, overload push button relay, capacitor and terminal block to connect to the borehole cable.
20 litres per minute at 126 metres head.
50 litres per minute at 94 metres head.
70 litres per minute at 60 metres head.
Was £ 528.75
Current Price £ 423.00
(Prices quoted are exclusive of V.A.T.)
Technical
Stock Code:
KP4B25R
Product Weight:
25.00 kg
Technical Overview:
Technical Data
Base support & upper head: technopolymetric
Non return valve: delrin
Stages & diffusers: noryl
Impeller: derlin
Wear ring & drive bush: polyurethane
Sleeve, coupling joint & guard: stainless steel
Fluid temp. range: 0 deg.C to + 40 deg.C
Coupling: 4” NEMA standard
Max. sand content: 100 grams per cubic metre
ACCESSORIES
Borehole cable and underwater joint.
Borehole pump support Rope.
MDPE Delivery tube and fittings.
Low level borehole probe set.
FOR MORE INFORMATION INCLUDING A PUMP OUTPUT GRAPH, CLICK ON THE LINK BELOW.
Further technical information on this product can be found at the following location:
http://www.amospumps.com/eckerp4bboreholepumps.htm